n order to increase the service life of your atomizer, you must remember that from time to time you need to clean the atomizer. If you’re not sure how to clean an atomizer we’ll listed three simple steps below.
1) Blow on it.
If you’re in a rush or you’re on the go and you don’t have any supplies with you then this is what you can do. Disconnect the battery from the atomizer and make sure there is no residual liquid that still needs to be removed. Then gently blow air into it and connect it back to the battery. Simple.
2) Rubbing alcohol
This is a more effective method; however, to avoid damaging the atomizer, it’s best to wash the atomizer using a syringe filled with rubbing alcohol. Irrigate both sides of the atomizer until the e juice is completely gone. Once you’re done with that you’ll need to dry out any residual alcohol as best you can.
3) Hot water
The atomizer is attached to a small piece of glass, with the help of pegs, so as not to burn your hands. Hold the item under hot running water for thirty seconds and then completely dry the atomizer. If you don’t have much time you can use a hairdryer.
Attention to the self-cleaning and repairing atomizer EGO T should consult with a specialist who can always tell how to disassemble the e-cigarette (cartomizer).